Gulf-Tek Hydraulic Power Units

Hydraulic Power Units

Rely on Gulf-Tek Quality

Gulf-Tek hydraulic power units are designed to deliver in working environments where others fail.

  • Kubota diesel engines
  • Models are available with hydraulic gear or pressure compensated hydraulic pumps, single or dual circuit
  • Skids are offshore rated, all welded and galvanized with 4 corner lift, drip pan and forklift pockets.
ModelHPU1015WK17HPU1222SM20HPU1420SM40HPU1422SM40
EngineKubota OC95 single cylinder air/oil cooled diesel engine rated 9.5 hp @ 3600 rpm, assembled with 12-volt electric start, recoil hand start, air cleaner, air intake shutdown, muffler, spark arrestor, fuel filter, 8-gallon aluminum fuel tank Kubota ZH602 liquid cooled diesel engine rated 16 hp @ 3600 rpm, assembled with mounted radiator, coolant recovery tank, air cleaner, manual air intake shutdown, muffler, spark arrestor, fuel filter, 12-gallon aluminum fuel tank, oil pressure gauge, hour meter, 12-volt electric start/charge system with F.W. Murphy engine controls with high temp and low oil shutdowns in a weatherproof box, mounted battery box with battery and cables Kubota D1005 liquid cooled diesel engine rated 24 hp @ 3000 rpm, assembled with mounted radiator, coolant recovery tank, air cleaner, manual air intake shutdown, muffler, spark arrestor, fuel filter, air starter, 8-gallon aluminum fuel tank, oil pressure gauge, hour meter Kubota D1005 liquid cooled diesel engine rated 24 hp @ 3000 rpm, assembled with mounted radiator, coolant recovery tank, air cleaner, manual air intake shutdown, muffler, spark arrestor, fuel filter, air starter, 8-gallon aluminum fuel tank, oil pressure gauge, hour meter
HydraulicsGear drive pump rated up to 3600 rpm @ 2500 psi, in port SAE 12, out port SAE 10, 17-gallon reservoir, oil site/temp glass, 50-micron suction strainer, flow control with adjustable, relief valve, inline flow meter, return filter, SS 3000 pressure gauge, ¾” quick disconnects Heavy duty gear pump rated up to 3500 rpm @ 2200 psi, 20 gallon hydraulic reservoir, oil site/temp glass, 50-micron suction strainer, flow control, adjustable relief valve, inline flow meter, return filter, SS 3000 pressure gauge, ¾ inch hydraulic quick disconnects with ¾ inch piping Gear drive pump rated up to 3500 rpm @ 2500 psi, import SAE 16, out port SAE 12, 40-gallon reservoir, oil site/temp glass, temperature gauge, 50 micron suction strainer, flow control, adjustable relief valve, inline flow meter, return filter, SS 3000 pressure gauge, ¾” quick disconnects Gear drive pump rated up to 3500 rpm @ 2500 psi, import SAE 16, out port SAE 12, 40-gallon reservoir, oil site/temp glass, temperature gauge, 50 micron suction strainer, flow control, adjustable relief valve, inline flow meter, return filter, SS 3000 pressure gauge, ¾” quick disconnects
SkidAluminum all welded wheel kit handles, heavy duty casters, engine vibration plate with vibration isolators, drip pan, bottom drain, center point lift, SS hardware, 12 volt battery with box and cables Structural steel all welded and galvanized roll frame, engine vibration plate with stableflex vibration isolators, drip pan, bottom drain, 4 corner lift, forklift pockets Structural steel all welded and galvanized roll frame, engine vibration plate with stableflex vibration isolators, drip pan, bottom drain, 4 corner lift, forklift pockets Structural steel all welded and galvanized roll frame, engine vibration plate with stableflex vibration isolators, drip pan, bottom drain, 4 corner lift, forklift pockets
DimensionsL 49” x W 29” x H 39”L 50” x W 32” x H 40”L 60” x W 32” x H 40” L 60” x W 32” x H 40”
Weight500 lbs.1,200 lbs. Approximate1,500 lbs.1,500 lbs.
Warranty2-year engine warranty major components, 1 year all other engine components, 1-year hydraulic pump warranty, 90 day all accessories 2-year engine warranty major components, 1 year all other engine components, 1-year hydraulic pump warranty, 90 day all accessories 2-year engine warranty major components, 1 year all other engine components, 1-year hydraulic pump warranty, 90 day all accessories 2-year engine warranty major components, 1 year all other engine components, 1-year hydraulic pump warranty, 90 day all accessories
Download Spec SheetPDFPDFPDFPDF
ModelHPU2022SM60HPU2022SM60DFCOCHPU2030SM60HPU2515SM100PCPOC
EngineKubota D1703M liquid cooled 3-cylinder diesel engine, rated 36 hp @ 2800 rpm, assembled with mounted radiator, coolant recovery tank, air cleaner, manual air intake shutdown, muffler, spark arrestor, fuel filter, air starter, idler pulley Assembly, hydraulic pump adaptor, 18-gallon Coast Guard approved fuel tank with fuel gauge and bottom shutoff valve Kubota D1703M liquid cooled 3-cylinder diesel engine, rated 36 hp @ 2800 rpm, assembled with mounted radiator, coolant recovery tank, air cleaner, manual air intake shutdown, muffler, spark arrestor, fuel filter, hydraulic pump adaptor, 18 gallon Coast Guard approved fuel tank with fuel gauge and bottom shutoff valve, 12 volt electric start/charge system with F.W. Murphy engine controls (High Temp/Low Oil shutdown) in a non-metallic, weather-proof enclosure, mounted battery box with battery and cables Kubota V2203M (tier 3 certified) liquid cooled 4-cylinder diesel engine rated 56 hp @ 2800 rpm with mounted radiator, coolant recovery tank, air cleaner, manual air intake shutdown, muffler, spark arrestor, fuel filter, 12-volt electric start, battery, box and cables (air starter optional), F.W. Murphy mechanical High temp and low oil shutdown weatherproof engine control panel Kubota D1703M liquid cooled diesel engine rated 37 hp @ 2800 rpm, assembled with mounted radiator, coolant recovery tank, air cleaner, poly manual air intake shutdown, muffler, spark arrestor, fuel filter, electric starter, mounted battery box with battery and cables, 12-gallon aluminum fuel tank, F.W. Murphy Engine controls (Low Oil/High Temp Shutdown, hour meter, key switch, 4 ft. loomed wire harness) in a non-metallic, weatherproof enclosure
HydraulicsParker Commercial Hydraulic gear drive pump rated up to 2800 rpm @ 2500 psi, import SAE 16, our port SAE 12, 60-gallon reservoir, oil site/temp glass, temperature gauge, 50-micron suction strainer, adjustable flow control, relief valve, inline flow meter, return filter, SS 5000 psi pressure gauge, ¾” quick disconnects, ¾” piping Parker Commercial Hydraulic gear drive pump rated up to 2800 rpm @ 2500 psi, in port SAE 16, out port SAE 12, 60-gallon reservoir, environmentally friendly hydraulic oil, oil site/temp glass, temperature gauge, 50-micron suction strainer, dual adjustable flow control, relief valve, inline flow meter, return filter, SS 5000 psi pressure gauge, ¾” quick disconnects, ¾” piping, hydraulic oil cooler Commercial hydraulic gear drive pump rated up 2800 rpm @ 3000 psi, omni directional dual flow control valve, 60-gallon reservoir, large capacity clean out ports, oil site/temp glass gauge, 50 micron suction strainer, return filter, pressure gauge Pressure compensated pump rated up to 2800 rpm @ 4500 psi, in port SAE #20, out port SAE #16, 100-gallon reservoir, environmentally friendly hydraulic oil, oil site/temp glass, temperature gauge, 50-micron suction strainer, flow control, adjustable relief valve, inline flow meter, return filter, SS 3000 pressure gauge, ¾” quick disconnects, hydraulic oil cooler
SkidStructural steel all welded galvanized roll frame, engine vibration plate with stableflex isolators, deluxe steel expanded metal radiator guard, beveled drip pan, bottom drain, 4 corner lift, forklift pockets 4”x10” Structural steel all welded galvanized roll frame, engine vibration plate with stableflex isolators, deluxe steel expanded metal radiator guard, beveled drip pan, bottom drain, 4 corner lift, forklift pockets 4”x10” Structural steel all welded roll frame, engine vibration plate with stableflex isolators, deluxe steel expanded metal radiator guard, beveled drip pan, bottom drain, 4 corner lift, forklift pockets (4”x10”) 18 gallon aluminum fuel tank with fuel gauge, CG approved Structural steel all welded and galvanized roll frame, engine vibration plate with stableflex vibration isolators, drip pan, bottom drain, 4 corner lift and forklift pockets
OptionsAir starter, Sentinel mechanical engine shutdown system, full aluminum enclosure, half enclosure
DimensionsL 66” x W 34” x H 50”L 66” x W 34” x H 50”L 78” x W 41” x H 55”L 82” x W 42” x H 60”
Weight2,500 lbs.2,500 lbs.3,000 lbs.2,250 lbs.
Warranty2-year engine warranty major components, 1 year all other engine components, 1-year hydraulic pump warranty, 90 day all accessories 2-year engine warranty major components, 1 year all other engine components, 1-year hydraulic pump warranty, 90 day all accessories 2-year engine warranty major components, year all other engine components, 1 year hydraulic pump warranty, 90 day all accessories 2-year engine warranty major components, 1 year all other engine components, 1-year hydraulic pump warranty, 90 day all accessories
Download Spec SheetPDFPDFPDFPDF
ModelHPU3030SM80HPU5020SM120HPU4530SM80
RatingMax ratings up to 30 GPM, up to 3,000 PSI
EngineKubota V3600E3B (4) cylinder naturally aspirated, rated 66.8 hp gross @ 2600 rpm, tier 3 certified liquid, cooled diesel engine with mounted radiator, coolant recovery tank, air cleaner, manual air intake shutdown (poly), micro adjustable speed control cable, muffler, Super Trapp spark arrestor, fuel filter, mounting feet, stableflex vibration isolators, hydraulic pump adaptor and hub, air starter, idler pulley Assembly, F.W. Murphy High temp and low oil shutdown (weatherproof), Air Start Optional Kubota V3600TE liquid cooled 4-cylinder turbo charged diesel engine, tier 3 certified, all mechanical fuel injection, rated 84.42 HP gross @ 2600 RPM, assembled with mounted radiator, coolant recovery tank, push fan, Donaldson air filter, Donaldson low tone muffler w/rain cap, spin on fuel filter, 12-volt electric start, F.W. Murphy mechanical engine controls mounted in weatherproof enclosure, oil pressure gauge, water temp gauge, magnetic switch, alternator light, hour meter, key switch, High temp and low oil shutdown, EZ oil drain valve, epoxy coated to customer specifications Kubota V3800DIT liquid cooled 4-cylinder turbo charged diesel engine rated 95 hp @ 2600 rpm net intermittent, assembled with mounted radiator, coolant recovery tank, air cleaner, manual air intake shutdown, muffler, spark arrestor, fuel filter, 30 gallon fuel tank, weatherproof engine controls, High temp and low oil shutdown, 12-volt battery with box and cables
HydraulicsCommercial gear drive hydraulic pump rated up to 30 gpm @ 3000 psi, 80 gallon JIC hydraulic fluid reservoir, hydraulic oil level and temp gauge, inline flow meter, flow control valve, adjustable relief valve, Donaldson hydraulic return filter, pressure gauge, all necessary high-pressure hoses, stainless steel hose fittings Parker P350A commercial gear pump rated 50 GPM @ 2000 PSI, close coupled to engine via Hayes hydraulic pump adaptor, Parker 35AA (4) bank flow control valve with directional flow levers, inline flow meter, 120-gallon reservoir, hydraulic oil cooler mounted in front of engine radiator, plumbed stainless steel piping, oil site/temp gauge, suction strainer, return filter, pressure gauge Gear drive pump rated up to 2600 rpm @ 3000 psi, in port SAE 16, out port SAE 12, 80-gallon reservoir, oil site/temp glass, temperature gauge, 50 micron suction strainer, flow control, adjustable relief valve, inline flow meter, return filter, SS pressure gauge, ¾” quick disconnects
SkidStructural steel skid all welded and galvanized, 2”x 8”x 3/16” box tubing base with 4” x 10” x 3/16” forklift pockets, full containment beveled drip pan with bottom drain, 2” x 2” x 3/16” box tubing roll frame with 4 corner lift pad eyes, pad eyes will be 572 steel cold cut with 11/16” shackle pin hole, 18 gallon aluminum Coast Guard approved removable fuel tank with bottom drain and fuel return, stainless steel hardware, engine vibration plate, stableflex vibration isolators, expanded metal radiator guard Structural steel all welded and galvanized skid, base consisting of 3” x 8” x 3/16” box tubing, 3” x 3” x 3/16” box tubing upright roll frame, 6” x 3/16” channel cross members to support engine and hydraulic reservoir, center point lift, 4” x 8” x 3/16” forklift pockets, chain binder pockets, (6) weld down tabs, 3 on each side of skid, engine vibration plate w/stableflex neoprene isolators, removable aluminum hood, removable radiator guard, 12-volt battery w/box and cables, secure battery tie down, removable 30-gallon USCG approved aluminum fuel tank w/site gauge, epoxy coated to customer specifications Structural steel all welded galvanized roll frame, engine vibration plate with stableflex vibration isolators, drip pan with bottom drain, center point lift, forklift pockets
DimensionsApprox. L 82” x W 42” x H 60”L 101” x W 48” x H 62”Approximate L 74” x W 40” x H 55”
Weight4,000 lbs. 5,000 lbs.
Warranty2-year engine warranty major components, 1 year all other engine components, 1 year hydraulic pump warranty, 90 day all accessories2-year engine warranty major components, 1 year all other engine components, 1 year hydraulic pump warranty, 90 days on all accessories2-year engine warranty major components, 1 year all other engine components, 1-year hydraulic pump warranty, 90 day all accessories
Download Spec SheetPDFPDFPDF

Why sell someone else’s equipment when you can sell your own?

More and more businesses are offering their customers a higher quality product through private labeling. Private labeled equipment allows for higher margins on equipment sales, builds brand loyalty and maintains exclusivity with your own brand. It also gives your business more control over pricing, marketing, sales and distribution.

Gulf Engine is your private label partner for:

  • Pumps
  • Generators
  • Pressure Washers
  • Compressors
  • Hydraulic Power Units
  • Offshore Light Towers

Let us find the right equipment for you.


Contact Us